Skripsi

APLIKASI OZON MENGGUNAKAN METODE KOMBINASI ARCING PLASMA DAN DIELECTRIC BARRIER DISCHARGE (DBD) UNTUK PENGOLAHAN WASTE TRANSFORMER OIL

---

This research discusses the penetrating strength of waste transformer oil that is exposed using ozone. Ozone is produced from an ozone generator that uses 1/2 ball electrodes made of stainless steel with variations in gap distance of 1 mm and 2 mm. High voltage generation as a discharge source in the ozone generator with one of the main components of the flyback transformer. Ozone was measured using an ORP meter, at application voltages of 6; 7; and 8 kV for each gap spacing variation. The highest ozone concentration was obtained from the combination of plasma arcing chamber and DBD at a gap distance of 1 mm and a voltage of 7 kV. Ozone exposure to sample oil uses the chamber that produces the highest ozone concentration, where each sample is given ozone exposure for 60; 120; 180; 240; 300 minutes, and samples without exposure as control. The breakdown voltage test uses the IEC-60156 standard with a 350 ml test cell volume, a 13 mm diameter ball electrode system, at a distance of 2.5 mm between electrodes. The test results for the control sample showed an average breakdown voltage of 20.5 kV. For the breakdown voltage of ozone exposure samples 60; 120; 180; 240; and 300 minutes, 25.6; 39.6; 41.1; 44.1; and 41.9 kV, respectively. These results show that the samples experienced an increase in breakdown strength after exposure, the longer the exposure, the more the breakdown strength increased.

---

Availability

Detail Information

Series Title

-

Call Number

T1602782024

Publisher

Indralaya : Prodi Teknik Elektro, Fakultas Teknik Universitas Sriwijaya., 2024

Collation

ix, 86 hlm.; ilus.; 29 cm

Language

Indonesia

ISBN/ISSN

-

Classification

628.540 7

Content Type

Text

Media Type

unmediated

Carrier Type

-

Edition

-

Subject(s)

Prodi Teknik Elektro
Limbah minyak trafo

Specific Detail Info

-

Statement of Responsibility

TUTI

Other version/related

File Attachment

Comments

---

You must be logged in to post a comment