Skripsi
UJI KINERJA ALAT PENGOLAHAN TANAH DENGAN BAJAK SINGKAL YANG MENGGUNAKAN PENGATUR KEDALAMAN PEMBAJAKAN DAN TIPE TAPAK RODA BESI BERTENAGA HAND TRACTOR
The objective of this research to determine the performance of soil tillage equipment that uses a moldboard plow using an iron wheel when tilling the soil with some was variety of soil ploughing depth regulators. This research was conducted from May 2025 to September at the Laboratory of Machinery, Soil and Water Engineering of the Agricultural Engineering Study Program, as well as the Practicum and Research Garden of the Faculty of Agriculture, Sriwijaya University. The research method used is an experimental method and then data processing using a descriptive method. The research parameters consist of the main by supporting parameters. The main parameters are field efficiency, field efficiency, and fuel requirements. The supporting parameters include travel time, tensile force, tensile force, wheel slip, ground reversal width, number of wheel rotations, moisture content, bulk density, soil plowing depth. This study shows that the blade wheel tread produces field efficiency, the best field capacity is 93.57 % and 0.051 m2/s, respectively, with the lowest wheel slip percentage of 32.06 %, while the best depth adjustment treatment with a coulter produces efficiency, the best field capacity of 93.58 % and 0.051 m2/s respectively with a wheel slip percentage of 34.94 %.