Skripsi
KETEBALAN FIBER TISSUE PADA DYE SENSITIZED SOLAR CELL DENGAN SISTEM ELEKTROLIT KONTINU BERBASIS INFUS
Dye Sensitized Solar Cell is a type of solar cell that works by utilizing dye molecules as light absorbing materials to convert solar energy into electrical energy. Electrolyte is one of the components of Dye Sensitized Solar Cell that can affect the performance of Dye Sensitized Solar Cell due to its volatile nature. The addition of a fiber tissue layer to Dye Sensitized Solar Cell functions as an electrolyte absorbing medium so that it can reduce evaporation, while the use of a continuous electrolyte system serves to supply electrolyte continuously so that its availability is maintained. This study aims to study the effect of applying a continuous infusion-based electrolyte system with variations in fiber tissue thickness as an electrolyte absorbing medium and electrolyte discharge on the performance of Dye Sensitized Solar Cells, especially efficiency. This study used a total of 12 samples, with a combination of factor A treatment of fiber tissue layer thickness (A1: no layer; A2: two layers (0.027 cm); A3: three layers (0.041 cm); A4: four layers (0.054 cm)) and factor B electrolyte infusion discharge (B1: 0.1 mL/minute; B2: 0.3 mL/minute; B3: 0.5 mL/minute). The results showed that continuous electrolyte discharge based on infusion and fiber tissue layer thickness as well as the combination (interaction) of both relatively affect the performance of Dye Sensitized Solar Cell, especially on efficiency and fill factor. Continuous electrolyte discharge based on infusion on Dye Sensitized Solar Cell produces the highest efficiency and fill factor respectively, which are 0.1% at a discharge of 0.3 mL/minute and 0.3099 at a discharge of 0.5 mL/minute. While the thickness of the fiber tissue layer produces the highest efficiency and fill factor, respectively, are 0.0983% at three layers thickness and 0.2720 at two layers thickness. The combination of continuous electrolyte discharge based on infusion and fiber tissue layer thickness in Dye Sensitized Solar Cell produces the highest efficiency and fill factor, respectively, are 0.1495% at a combination of 0.3 mL/minute discharge with three layers fiber tissue layer thickness and 0.3511 at a combination of 0.5 mL/minute discharge with two layers fiber tissue layer thickness. The best Dye Sensitized Solar Cell is found in a combination of continuous electrolyte discharge of 0.3 mL/minute with three layers fiber tissue layer thickness with electricity, Voc: 757 mV, Isc: 0.1752 mA, Vmax: 400 mV, Imax: 0.0777 mA, Fill Factor (FF): 0.2343, and efficiency: 0.1495%.
No other version available