Skripsi
OPTIMASI DAN KARAKTERISASI DISPERSI PADAT KLARITROMISIN DENGAN VARIASI JUMLAH NATRIUM ALGINAT, KITOSAN, DAN WAKTU PENGGILINGAN MENGGUNAKAN METODE DESAIN FAKTORIAL
Clarithromycin is a macrolide-class antibiotic classified under the biopharmaceutics classification system (BCS) class II, characterized by low water solubility and high permeability. This study aims to enhance its solubility using a combination of sodium alginate and chitosan as carrier agents, as well as to evaluate the effect of variations in grinding time on its characterization. The optimization process was carried out using Design-Expert® software, applying a 2³ factorial design method. Solid dispersions were prepared using the co-grinding method, and the optimum formula was determined based on the highest desirability value with the best characterization results, including compressibility index, Hausner ratio, moisture content, content uniformity, and solubility. The formulation design consisted of 8 formulas, namely F1–F8, with each formula containing 100 mg of clarithromycin, variations in sodium alginate amounts (80–100 mg), variations in chitosan amounts (70–100 mg), and variations in grinding time (30–60 minutes). The optimization results indicated that F8 was the optimum formula, containing 100 mg each of chitosan and sodium alginate, with a grinding time of 60 minutes. Characterization results of the optimum formula showed a decrease in intensity to 124.25 (a.u.) in XRD analysis, with a reduction in crystallinity of 2.94%. No interaction between the carrier polymers and clarithromycin was observed in the FTIR test. Morphological changes in the particles were identified through SEM analysis, with a solid dispersion PDI of 34.25%. The dissolution result at 60 minutes was 90.6% ± 0.433, whereas pure clarithromycin showed 65.6% ± 0.016, with R² values for the Baker–Lonsdale release model of 0.9812 and 0.9852. The stability of the solid dispersion was confirmed through stability testing. Based on these results, the optimum clarithromycin solid dispersion formula demonstrated good characterization and was able to enhance solubility. Keyword(s): chitosan, clarithromycin, co-grinding, factorial design, sodium alginate
No other version available