Skripsi
PENGARUH METODE SAAL ( SEQUENTIAL ACID-ALKALINE LEACHING ) TERHADAP KOMPOSISI COAL FLY ASH DENGAN ANALISIS X-RAY FLUORESCENCE
The increasing production of coal fly ash waste in Indonesia and its relatively low utilization rate, highlighting the need for effective treatment methods to enhance its added value. The objective of this research was to investigate the effect of the Sequential Acid–Alkaline Leaching (SAAL) method on the chemical composition of coal fly ash (CFA) using X-Ray Fluorescence (XRF) analysis. Coal fly ash, a by-product of coal combustion, contains a significant amount of silica, making it a promising raw material for value-added applications. The study employed coal fly ash samples obtained from the Banko Barat 3×10 MW Steam Power Plant (PLTU). The SAAL process consisted of an acid leaching stage using concentrated H₂SO₄, followed by an alkaline leaching stage with NaOH solutions at concentrations of 3, 6 and 8 Molars. The XRF analysis of the untreated sample revealed an initial SiO₂ content of 40.743%, accompanied by other major oxides such as Al₂O₃ and Fe₂O₃. The experimental results demonstrated that the SAAL treatment altered the chemical composition of the coal fly ash. An increase in sulfur trioxide (SO₃) content was observed after the acid leaching stage due to reactions involving sulfuric acid, while the silica content in the residual solid decreased to approximately 5–11%. This reduction was attributed to the dissolution of silica into the filtrate during the alkaline leaching process, resulting in its absence from the residue analyzed by XRF. The study concludes that the SAAL method is capable of modifying the chemical composition of coal fly ash. However, the use of high-concentration NaOH solutions under the investigated conditions did not produce optimal results for silica retention in the solid residue. Future research is recommended to evaluate lower NaOH concentrations, optimize additional process parameters, and incorporate complementary characterization techniques such as X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) to provide a more comprehensive understanding of the extraction process.
No other version available