Skripsi
ANALISIS SIFAT MEKANIK PADA PENGELASAN SMAW BAJA KARBON DAN STAINLESS STEEL 304 DENGAN KAMPUH V
This study aimed to analyze the effect of welding current variations on the mechanical properties and microstructure of dissimilar metal welded joints between ASTM A36 steel and Stainless Steel 304 using the Shielded Metal Arc Welding (SMAW) process with a V-groove joint and E309L electrode. The welding currents used were 80 A, 100 A, and 120 A. The research method included welding, impact testing, Vickers hardness testing, and microstructural observation in the weld metal, Heat Affected Zone (HAZ), and base metal regions. The results showed that increasing the welding current affected the microstructure and mechanical properties of the welded joints. The microstructure of ASTM A36 steel was dominated by ferrite and pearlite, while Stainless Steel 304 was dominated by austenite with indications of delta ferrite in the weld metal region. The impact test results indicated that the impact value increased from 9.229 J at 80 A to 13.317 J at 100 A and 15.009 J at 120 A. The highest toughness was obtained at a welding current of 120 A. The hardness test results showed that a welding current of 100 A produced a more uniform hardness distribution in the base metal, HAZ, and weld metal regions. Based on the results, it can be concluded that SMAW welding current variations significantly affect the microstructure, hardness, and toughness of dissimilar welded joints between ASTM A36 steel and Stainless Steel 304.
No other version available