Skripsi
PENGARUH SURFACTANT DALAM DELIGNIFIKASI OKSIGEN TERHADAP KUALITAS BILANGAN KAPPA, VISKOSITAS DAN BRIGHTNESS PULP
The oxygen delignification of pulp process requires proper control of the kappa number, viscosity, and brightness to achieve optimal pulp quality. However, increasing kappa number reduction is often accompanied by a significant decrease in viscosity, thereby reducing oxygen delignification selectivity. Therefore, auxiliary chemicals in the form of surfactants are required to enhance the effectiveness of the pulp oxygen delignification process. This study aimed to determine the most effective product and dosage of surfactant capable of achieving a kappa number reduction of more than 35% while maintaining viscosity and improving brightness. The research employed an experimental approach using three product of surfactants, namely Surfactant A, Surfactant B, and Surfactant C, with dosage variations of blank, 100, 200, 300, and 400 ppm. The analysed parameters included kappa number, viscosity, selectivity, and brightness. The results showed that Surfactant A achieved optimum performance at a dosage of 100 ppm with a selectivity value of 3.15 points and brightness of 37.2 %ISO. Surfactant B reached optimum conditions at 300 ppm with a selectivity value of 3.20 points and brightness of 37.0 %ISO, while Surfactant C demonstrated the best performance at 300 ppm with a selectivity value of 3.27 points and brightness of 37.7 %ISO. All optimum conditions produced a kappa number reduction of more than 35%. Therefore, Surfactant C at a dosage of 300 ppm was identified as the most effective surfactant for improving the selectivity and quality of the pulp oxygen delignification process.
No other version available