Skripsi
KINERJA FLAT SLAB BETON GEOPOLIMER DENGAN PERKUATAN TULANGAN BAJA TRANSVERSAL DAN ALUMINIUM TERHADAP PUNCHING SHEAR
Flat slab systems in building structures are susceptible to punching shear failure around the column due to high stress concentration. One method to improve the shear capacity of slabs is by using transverse steel reinforcement and additional strengthening materials such as aluminum. This study aims to analyze the punching shear capacity of geopolymer concrete flat slabs strengthened with transverse reinforcement and aluminum using the finite element method through ANSYS software. The structural model has dimensions of 1000 × 1000 × 120 mm with several variations, namely GP-0, GP-A0, GP-A5, GP-A8, and GP-A10. The geopolymer concrete used has a compressive strength of 22,85 MPa. The analysis was carried out under monotonic loading until failure occurred and evaluated based on load–deflection behavior and ultimate load capacity. The results indicate that the addition of aluminum and transverse reinforcement increases the ultimate load capacity compared to the unreinforced model. The load capacity increases from 202,5 kN in GP-0 to 280 kN in GP-A10. Increasing the diameter of shear reinforcement also results in greater structural deformation. The study concludes that the combination of aluminum and transverse reinforcement effectively improves the punching shear capacity of geopolymer concrete flat slabs.
No other version available