ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PEMBANGUNAN DIAPHRA…

Pembangunan Mass Rapid Transit (MRT) Jakarta fase 2A CP 202 melibatkan pekerjaan Diaphragm Wall (D-Wall) yang berisiko tinggi terhadap keselamatan dan kesehatan kerja (K3). Penelitian ini bertujuan mengidentifikasi bahaya, menganalisis tingkat risiko, serta menentukan strategi pengendalian menggunakan Job Safety Analysis (JSA). Metode kuantitatif dilakukan melalui kuesioner kepada 21 responden …

 ANALISIS IMPLEMENTASI SARANA PRASARANA KESELAMATAN DAN KEAMANAN PENGUNJUNG …

The increase in the number of visitors at Mutun Beach in Pesawaran has encouraged the government and managers to improve facilities and infrastructure, including traffic quality, security, safety of marine activities, handling emergencies and public facilities. Although popular for swimming and various tourist services, the risk of harm remains, so it is important to implement appropriate safet…

ANALISIS FAKTOR-FAKTOR YANG BERHUBUNGAN DENGAN PERILAKU KESELAMATAN BERHUBUNG…

Traffic accidents are one of the public health problems that require serious handling. Driving safety behavior is an aspect that must be applied in traffic. The purpose of this study was to analyze factors related to driving safety behavior in Sriwijaya University students. This study used a cross-sectional study design. The sample in this study consisted of 100 students from Sriwijaya Universi…

ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA MELALUI METODE JOB SAFETY ANA…

Occupational safety and health in the mining industry is an important thing to pay attention to as mining facility workshop operators are one of the workers who are quite vulnerable to risks and dangers in every work process. Two cases of equipment failure were found, namely the welder and screw air compressor in 2022. Based on case findings, it is necessary to control risks and dangers to mini…

FAKTOR - FAKTOR YANG BERHUBUNGAN DENGAN GEJALA CARPAL TUNNEL SYNDROME (CTS) P…

Carpal Tunnel Syndrome (CTS) is a type of compressive neuropathy caused by excessive pressure on the median nerve. It is the most commonly encountered compressive neuropathy, with initial symptoms including pain and numbness in the wrist area where the median nerve is located. This study aims to identify factors associated with Carpal Tunnel Syndrome (CTS) symptoms, categorized into individual …

FAKTOR-FAKTOR YANG BERHUBUNGAN DENGAN KELUHAN MUSCULOSKELETAL DISORDERS (MSDs…

Complaints in the Musculoskeletal Disorders (MSDs) system are complaints of pain in the skeletal muscles felt by someone ranging from mild to severe complaints. One of the workers who are at risk of experiencing Musculoskeletal Disorders (MSDs) complaints is batik work, in the process of making batik requires precision such as during the process of making sketches or drawing motifs on the fabri…

HUBUNGAN IKLIM KESELAMATAN (SAFETY CLIMATE) TERHADAP PERILAKU KESELAMATAN (SA…

Safety climate is a measure of safety culture that corresponds to a common perception between individuals in an organization. Safety behavior itself is a person's action that minimizes work accidents while working. Safety behavior has caused 70% of the cause of the high number of accidents among workers in Indonesia because safety behavior is not implemented. The number of accidents in Indonesi…

ANALISIS IMPLEMENTASI KESELAMATAN DAN KESEHATAN KERJA (K3) PADA BENGKEL JURUS…

Work accidents can happen anywhere, including during practical learning sessions in vocational schools. Therefore, work accidents must be prevented by implementing and improving the quality of Occupational Health and Safety (OHS) in practical rooms related to safe work practices and safe and comfortable working environments. This study aims to analyze the implementation of Occupational Health a…

FAKTOR YANG BERHUBUNGAN DENGAN TINDAKAN TIDAK AMAN (UNSAFE ACTION) PADA PEKER…

One of the factors causing work accidents is caused by unsafe actions. Unsafe actions are influenced by both internal and external factors of the worker. The aim of this research is to determine factors associated with unsafe actions among palm oil processing workers at PT Green Global Sumatra, Musi Banyuasin. This type of research was carried out using quantitative methods with a cross-section…

EVALUASI PENERAPAN KESELAMATAN DAN KESEHATAN KERJA DENGAN MENGGUNAKAN METODE …

Occupational Safety and Health (OSH) plays an important role in construction projects to prevent workplace accidents, protect workers, and ensure that project activities run safely and efficiently. The construction sector is known to have a high risk of accidents in Indonesia due to weak supervision, low compliance with safety procedures, and the suboptimal implementation of OSH management syst…

ANALISIS SAFETY CULTURE MATURITY MODEL (SCMM) DI PT.HUTAMA KARYA INFRASTRUKTU…

This research aims to analyze the level of safety culture maturity (Safety Culture Maturity Model - SCMM) at PT. Hutama Karya Infrastructure. Safety culture is an important aspect in the implementation of occupational safety and health (K3) which can influence workers' safety perceptions and behavior. Based on Law no. 1 of 1970 concerning Work Safety and Government Regulation no. 50 of 2012 con…

HUBUNGAN EFIKASI DIRI DAN BEBAN KERJA MENTAL DENGAN STRES KERJA GURU SLB-B NE…

Stress can occur to anyone including special education teachers. SLB teachers are more vulnerable to experiencing work stress because they have a higher workload than regular school teachers. Therefore, special education teachers are more vulnerable to experiencing excessive mental workload and low self-efficacy. Work stress experienced by teachers not only has an impact on themselves but can a…

PENGARUH LATIHAN PEREGANGAN OTOT TANGAN SEBAGAI BENTUK USAHA PENURUNAN KELUHA…

Driving jobs such as motorcyclists are one of the jobs that can cause Carpal Tunnel Syndrome (CTS) due to prolonged wrist posture on the motorbike handlebars. Higher prevalence rates of Carpal Tunnel Syndrome (CTS) have been found in certain groups with repetitive hand movements, especially wrist flexion and arm extension. Activities using hands that are carried out repeatedly with additional f…

PENILAIAN RISIKO KESELAMATAN DAN KESEHATAN KERJA PADA KEGIATAN LOADING DAN HA…

The process of loading and hauling coal is one of the important activities of mining that have very high occupational safety and health hazards and risks. The purpose of this research is to identify hazards, risk assessment and control in coal loading and hauling activities at PT Bukit Asam Tbk. This type of research is qualitative with a descriptive approach. The methods used are in-depth inte…

ANALISIS PENERAPAN MANAJEMEN KESELAMATAN DAN KESEHATAN KERJA (K3) DI PT SEMEN…

Health, Safety, and Environment (HSE) management plays an important role in creating a safe working environment and preventing workplace accidents. This study aims to analyze the implementation of HSE management in the production department of PT Semen Baturaja using a qualitative method through interviews, observations, and documentation. The results indicate that the implementation of HSE man…

PENGARUH TEKANAN PANAS TERHADAP KELELAHAN KERJA PADA PEKERJA BAGIAN PRODUKSI …

Workers in the industrial sector cannot be separated from the dangers and risks that exist in the work environment, including heat pressure generated by machines or production equipment, especially for workers around smelters, boilers, ovens and heating furnaces in factories. Workers who are exposed to high working environmental temperatures can be at risk for health problems and decreased work…

HUBUNGAN KEBISINGAN DENGAN KELELAHAN KERJA PADA PEKERJA DI BAGIAN CHIP HANDLI…

Noise and industry are inseparable because almost all production processes involve the use of tools or machines that produce sound intensity to noise in the work environment. Noise intensity that exceeds the threshold value can potentially have a non-auditory impact, namely fatigue. This study aims to determine the relationship between noise and fatigue in workers in the Chip Handling section o…

ANALISIS TINGKAT PENCAPAIAN KINERJA KESELAMATAN PERTAMBANGAN BERDASARKAN PART…

PT Sumigita Jaya is one of the sub contractors that collaborates with PT Bukit Asam Tbk in the Coal Transport Handling and Coal Handling Operations Work Unit. Mining safety performance assessment is based on four indicators. One indicator of mining safety performance is worker participation which measures the active role of workers in managing K3 at mining sites. In 2022, PT Sumigita Jaya had t…

HUBUNGAN ANTARA POSTUR KERJA DENGAN KELUHAN MUSKULOSKELETAL PADA PEKERJA DI B…

Employees who regularly use computers are at risk of adverse effects from poor work posture due to prolonged sitting and repetitive movements, which can lead to fatigue and decreased productivity. The aim of this study is to determine the relationship between work posture and complaints of discomfort among employees at the Central Bureau of Statistics (BPS) of South Sumatra Province. This obser…

INITIAL REVIEW KESELAMATAN DAN KESEHATAN KERJA PERKANTORAN DI KANTOR DINAS KE…

The implementation of Occupational Safety and Health (OHS) in government offices is often considered a lower priority than in the industrial sector. This is evident in the offices of the Health Office and the Industry and Trade Office of Lubuklinggau City. This study aims to evaluate the implementation of office OHS standards in both institutions based on Minister of Health Regulation No. 48 of…

PEMENUHAN HAK KESELAMATAN DAN KESEHATAN KERJA BAGI PEKERJA ALIH DAYA PADA SEK…

Penelitian ini membahas pemenuhan hak keselamatan dan kesehatan kerja (K3) bagi pekerja alih daya pada sektor pertambangan, dengan studi kasus di PT. Bukit Asam, Kabupaten Muara Enim. Latar belakang penelitian ini didasari oleh masih lemahnya perlindungan hukum terhadap pekerja alih daya, terutama dalam hal pelaksanaan K3, meskipun sudah terdapat peraturan perundang-undangan yang mengaturnya. T…

ANALISIS RISIKO KESEHATAN DAN KESELAMATAN KERJA PADA PEKERJAAN KONSTRUKSI GUD…

Accidents at work sites, especially in a construction project, have been very common in Indonesia. The larger the scale of the project, the greater and more risks are present in a construction project. The construction of the Palembang City Archive Warehouse is one of the Palembang City PUPR government programs. This project is one of the two-storey construction projects that uses complex steel…

ANALISIS FAKTOR KEBERHASILAN DAN HAMBATAN IMPLEMENTASI SISTEM MANAJEMEN KESEL…

The implementation of Occupational Health and Safety (OHS) needs to be applied systematically with the existence of an Occupational Health and Safety Management System (OHSMS). Although there is a clear urgency regarding the implementation of OHSMS, contractor companies still experience obstacles to its implementation, which has the potential to increase the risk of work accidents. Based on the…

IMPLEMENTASI PROGRAM KESELAMATAN DAN KESEHATAN KERJA (K3) DI PT PERTAMINA REF…

Occupational Health and Safety (OHS) is a crucial aspect of company operations, especially in the oil and gas industry, which has a high level of risk. This study aims to analyze the implementation of the OHS program at PT Pertamina Refinery Unit III Plaju and identify supporting and inhibiting factors in its implementation. This research employs a qualitative descriptive approach using Soren C…

ANALISIS IMPLEMENTASI KESELAMATAN DAN KESEHATAN KERJA (K3) PADA BENGKEL PENGE…

Occupational Health and Safety is an effort to protect workers and individuals in the vicinity of the workplace from occupational accidents and support the improvement of workshop or company productivity. This study aims to investigate the implementation of Occupational Health and Safety (OHS) in welding workshops in the BPR Ranau Tengah District. The study adopts a qualitative descriptive appr…

SMART SAFETY: Panduan Penerapan SMK3 yang Efektif

Edition

-

ISBN/ISSN

978-979-078-403-1

Collation

xviii, 337 hlm. : ilus. ; 23 cm.

Series Title

-

Call Number

658.408 Ram s

Modul Menerapkan Prosedur Keselamatan, Kesehatan Kerja dan Lingkungan Tempat …

Edition

-

ISBN/ISSN

978-979-075-031-6

Collation

ix, 62 hlm.;ilus.; 23 cm

Series Title

-

Call Number

629.2 Kat m

HUBUNGAN INTENSITAS KEBISINGAN TERHADAP KEJADIAN HIPERTENSI PADA PEKERJA INDU…

In the production process the skewer industry uses several types of machines which cause noise in the production area. Exposure to noise for a long time can trigger hypertension in workers. This study analyzed the relationship between noise intensity and the incidence of hypertension in skewer industrial workers. The study used a cross sectional study and a total sample of 49 respondents. Measu…

ANALISIS FAKTOR RISIKO KELUHAN MUSCULOSKELETAL DISORDERS (MSDs) PADA PEKERJA …

Complaints in the Musculoskeletal system are complaints in parts of the skeletal muscles felt by a person ranging from very mild complaints to very painful. This study aims to analyze the risk factors for complaints of Musculoskeletal Disorders (MSDs) in lifters at PT. Tunas Baru Lampung, Tbk. South Sumatra. This research is a quantitative research using the total sampling method in sampling 45…

ANALISIS FAKTOR RISIKO STRES KERJA PADA PEKERJA WELDER DI PT. VME PROCESS KOT…

Job stress is the response shown by the workforce when faced with work demands and work pressure that are not in accordance with their knowledge and abilities. Job demands and length of work also integrate mental, physical and emotional abilities, thereby increasing the vulnerability to work stress. The prevalence of work stress in Indonesia for the 2019/2020 period was significantly higher tha…