PERILAKU KEKUATAN TEKAN DAN MODULUS ELASTISITAS SELF COMPACTING CONCRETE YANG…

Along with the growing construction field, concrete has become one of the most needed materials in modern construction. The advantages that concrete has become a good value in the field of construction. Innovation in concrete technology in modern construction needs to be done to meet the increasing needs of construction development and overcome the weaknesses that occur in concrete. The innovat…

CHARACTERISTICS OF GEOPOLYMER ARTIFICIAL AGGREGATE USE IN NORMAL CONCRETE

Concrete is a very important element and is widely used in various construction work industries, but concrete has a weakness: its specific gravity is quite large (2200 – 2500 kg/m3). In concrete, aggregate occupies 60% -80% of the concrete volume, affecting the specific gravity of the concrete. Using lightweight aggregate is one way to reduce weight and increase the strength and durability of…

ANALISIS KETAHANAN SULFAT REACTIVE POWDER CONCRETE (RPC) DENGAN VARIASI W/C

Reactive powder concrete adalah jenis beton berkinerja tinggi dengan porositas rendah. RPC menghilangkan pemakaian agregat kasar pada campurannya sebagai tujuan untuk meningkatkan kekompakkan, kestabilan komponen campuran, dan meminimalkan cacat internal pada material seperti ruang pori. Reactive powder concrete tersusun dari material seperti semen Portland (OPC), pasir kuarsa, tepung kuarsa, s…

Prestressed Concrete Designe's Handbook, THIRD EDITION

Edition

3

ISBN/ISSN

0-7210-1232-9

Collation

xxii, 556 p.; 24 cm.

Series Title

-

Call Number

624.183 Abe p

Algorithmic Aspects in Information and Management: 16th International Confere…

This book constitutes the proceedings of the 16th International Conference on Algorithmic Aspects in Information and Management, AAIM 2022, which was held online during August 13-14, 2022. The conference was originally planned to take place in Guangzhou, China, but changed to a virtual event due to the COVID-19 pandemic. The 41 regular papers included in this book were carefully reviewed and s…

Discrete Mathematics and its Applications

Edition

7th

ISBN/ISSN

978-0-07-131501-2

Collation

xxiv, 836 p. : ilus. ; 27 cm.

Series Title

-

Call Number

511.1 Ros d

International RILEM Conference on Early-Age and Long-Term Cracking in RC Stru…

This volume gathers the latest advances, innovations and applications in the field of crack control in concrete, as presented by leading international researchers and engineers at the International RILEM Conference on Early-age and Long-term Cracking in RC Structures (CRC 2021), held in Paris, France on April 9, 2021. It covers early-age and long-term imposed deformations in concrete, analytica…

Principles of Cement and Concrete Composites

This book presents an introduction, a discussion of the concept of the design and the concrete’s development, and the properties and testing of the concrete in fresh and hardened stages. After an introduction to the principles of cement and concrete composites, the reader will find information on the principles of quantum-scaled cement, low-carbon cement, fiber-reinforced concrete, reactive p…

Fibre Reinforced Concrete: Improvements and Innovations

This volume highlights the latest advances, innovations, and applications in the field of fibre reinforced concrete (FRC) and discusses a diverse range of topics concerning FRC: rheology and early-age properties, mechanical properties, codes and standards, long-term properties, durability, analytical and numerical models, quality control, structural and Industrial applications, smart FRC’s, n…

Durability of Concrete Structures

This book provides a collection of recent research works, related to structural stability and durability, service life, reinforced concrete structures, recycled materials, and sustainability with endogenic materials. Intended as an overview of the current state of knowledge, the book will benefit scientists, students, practitioners, lecturers and other interested parties. At the same time, the …

Descriptor Systems of Integer and Fractional Orders

This book covers some selected problems of the descriptor integer and fractional order positive continuous-time and discrete-time systems. The book consists of 3 chapters, 4 appendices and the list of references. Chapter 1 is devoted to descriptor integer order continuous-time and discrete-time linear systems. In Chapter 2, descriptor fractional order continuous-time and discrete-time linear…

Seismic Performance Analysis of Concrete Gravity Dams

This book evaluates the seismic performance of concrete gravity dams, considering the effects of strong motion duration, mainshock-aftershock seismic sequence, and near-fault ground motion. It employs both the extended finite element method (XFEM) and concrete damaged plasticity (CDP) models to characterize the mechanical behavior of concrete gravity dams under strong ground motions, including …

Diagnostic of Concrete Samples Affected by Internal Swelling Reactions

This book offers a complete diagnosis of concrete samples collected from a pile cap block of residential buildings affected by internal swelling reactions. Covering an extensive laboratory campaign to evaluate the transport properties of concrete samples, as well as their physical and chemical composition using advanced techniques to analyse cores extracted from real buildings that have concret…

Prestressed Concrete

This textbook imparts a firm understanding of the behavior of prestressed concrete and how it relates to design based on the 2014 ACI Building Code. It presents the fundamental behavior of prestressed concrete and then adapts this to the design of structures. The book focuses on prestressed concrete members including slabs, beams, and axially loaded members and provides computational examples t…

Discrete Element Method in the Design of Transport Systems

This book deals with the design and optimization of the bucket elevator using the discrete element method (DEM). It describes the underlying scientific basis for the design of transport equipment using computer simulations and is focused on issues relevant to the industrial sector, mechanical engineering; and the transport, treatment, measurement, and storage of bulk materials. It presents solu…

Mechanical Properties of Self-Compacting Concrete: State-of-the-Art Report of…

The State-of-the-Art Report of RILEM Technical Committee 228-MPS on Mechanical properties of Self-Compacting Concrete (SCC) summarizes an extensive body of information related to mechanical properties and mechanical behaviour of SCC. Due attention is given to the fact that the composition of SCC varies significantly. A wide range of mechanical properties are considered, including compressive st…

Eurocode 2 Design Data for Reinforced Concrete Columns

This book was written to facilitate column sizing and reinforcement design for structural engineers. It arranges the design data in a clearly structured manner, and provides quick and easy ways for engineers to compare the feasibility of multiple alternatives (various column sizes and reinforcement configurations). With the help of this book, engineers can rapidly produce outputs for architects…

Modelling of Concrete Behaviour at High Temperature

This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the modelling of concrete behaviour at high temperature. Some monographs on the subject have been published already but generally they do not cover the whole range of possibilities which are enc…

Design of Reinforced Concrete Silo Groups

This book offers a new calculation procedure of the structural behavior of grouped layout of silos, easy to use and with satisfactory responses. Groups of reinforced concrete silos are structures commonly used in the food industry, where it is usually necessary to separate the storage of different types and sources of grain. The grouped layout of silos has numerous benefits when compared …

Thermal Cracking of Massive Concrete Structures

This book provides a State of the Art Report (STAR) produced by RILEM Technical Committee 254-CMS ‘Thermal Cracking of Mas-sive Concrete Structures’. Several recent developments related to the old problem of understanding/predicting stresses originated from the evolution of the hydration of concrete are at the origin of the creation this technical committee. Having identified a lack in the …

Electro-discharge Technology for Drilling Wells and Concrete Destruction

This book provides a concise introduction to the physical foundations of the electro-discharge technology and applies it to the drilling of wells, the demolition of reinforced concrete objects, and the cutting of cracks in rocks and concrete. The electro-physical basis of this technology and the technical implementation of using spark discharge as a “working tool” in the above-mentioned con…

DISCRETE MATHEMATICAL STRUCTURES, Sixth Edition

Edition

6th

ISBN/ISSN

978-0-13-207845-0

Collation

iv, 540 p. : ill. ; 28 cm.

Series Title

-

Call Number

519.535 Kol d

Injection Technologies for the Repair of Damaged Concrete Structures

This book analyzes the most important achievements in science and engineering practice concerning operational factors that cause damage to concrete and reinforced concrete structures. It includes methods for assessing their strength and service life, especially those that are based on modern concepts of the fracture mechanics of materials. It also includes basic approaches to the prediction of …

Discrete-Time Control System Design with Applications

This unique book provides a bridge between digital control theory and vehicle guidance and control practice. It presents practical techniques of digital redesign and direct discrete-time design suitable for a real-time implementation of controllers and guidance laws at multiple rates and with and computational techniques. The theory of digital control is given as theorems, lemmas, and propositi…

REINFORCED CONCRETE: A FUNDAMENTAL APPROACH, FIFTH EDITION

Edition

-

ISBN/ISSN

0-13-005394-1

Collation

xiii, 89 p.; 24 cm

Series Title

-

Call Number

624.18341 Naw r

DESIGN OF PRESTRESSED CONCRETE STRUCTURES, THIRD EDITION

Edition

3rd

ISBN/ISSN

-

Collation

v, 643 p. : ill. ; 23 cm

Series Title

-

Call Number

693.542 Lin d

Ultimate Load Analysis of Reinforced and Prestressed Concrete Structure

Edition

-

ISBN/ISSN

-

Collation

248 p. : ill. ; 23 cm

Series Title

-

Call Number

691.3 Jon u

Durability of Concrete Structures and Constructions : SILOS, BUNKERS, RESERVO…

Edition

-

ISBN/ISSN

90-5809-229-1

Collation

v, 403 p.; ill.; 24 cm.

Series Title

-

Call Number

624.183 Pou d

Design for Earthquake Resistant Reinforced Concrete Buildings

Edition

-

ISBN/ISSN

-

Collation

-

Series Title

-

Call Number

691.3 Tet d

REINFORCED CONCRETE DESIGN, SECOND EDITION

Edition

2nd

ISBN/ISSN

0-07-049504-1

Collation

xxii, 875 p.: ill.; 27 cm.

Series Title

-

Call Number

624.183 Pil r